 |
|
|
|
|
|
|
|
DOWNLOAD THE BROCHURE
|
|
|
|
|
All our brochures and datasheets are available on www.myoros.com.
If you are already a myOROS user, click here to download the brochure.
If you are not, you should first register filling in a short form to be able to access this restricted area.
myOROS will also give you the opportunity to download demo software and literature related to Noise and Vibration for free.
|
|
|
|
|
 |
|
|
|
|
- Balancing on 1 or 2 planes
- 1 or 2 sensors on each planes: horizontal and vertical
- Based on synchronous order analysis
- Balancing quality selection
- Correction positions choice
- Balancing prognosis
- Test based on a rugged portable analyzer for field measurements
- Report generation
|
|
|
|
|
|
|
|
The OROS Balancing Solution will let any machine (rotors, axles and shafts), be balanced on one or two planes. The method uses two measurements of the vibration at the bearings: one under initial conditions and one using a trial mass for a one plane balancing and a second one for two plane balancing.
|
|
|
With this technique, the number of machine starts is reduced, for example only 2 starts are necessary for a one plane balancing. When a balancing test has been achieved, the unbalance correction can be readjusted periodically without any further test thanks to the trim balance method.
Thanks to a one shot measurement, time and cost can be optimized for balancing tests. This technique can equally be used for balancing in series similar mechanical components basing the correction on only one machine start: this possibility is particularly interesting in production line Balancing.
|
|
|
The Balancing Solution is part of the family of solutions offered by OROS for Rotating Applications. Balancing rotors is a common practice during fault diagnosis on rotating machinery. Based on the OROS portable and rugged analyzers, the Balancing solution is well adapted for field measurements.
Also based on the order tracking analysis technique, it can be performed efficiently and accurately. The Synchronous Order tracking thus allows a precise phase averaging even if the rotating speed is not perfectly stationary. A Balancing report can be easily generated showing for example the correction diagrams. The Balancing solution the tool to bring for Balancing cessions.
|
back to top
|
|
| |
|
|
